Tech Accessories
Steel U-Channel Posts
|
 |
6, 7 or 8 Foot, Steel, U-CHANNEL POSTS
Our U-Channel sign posts are approved by the Federal Highway Administration (FHWA) and the American Association of State Highway and Transportation Officials (AASHTO). They comply with the mechanical requirements for grade 60 steel of ASTM A499 and the chemical requirements for grade 1080 steel of ASTMA576.
Posts are available in Green Baked enamel or Galvanized. Posts weigh approximately 2 pounds per foot.
3/8” diameter holes start 1” from top of post and are spaced every 1 inch, center to center.
|
Composite U-Channel Posts
|
 |
6, or 8 Foot, Composite, U-CHANNEL POSTS
Closed U-Channel profile allows for placing Reflector-Strips on front. Posts come drilled 1” down from top every 3” to 21”. Posts can be easily drilled with additional holes.
1/8" thick composite material.
5 times stronger than steel posts.
75% lighter than steel posts.
Maintenance free. Never rusts.
Green, White or Yellow.
Molded Point bottom for quick installation. |
Composite Square Posts
|
 |
8 or 10 Foot, Composite Square Posts
Square profile allows for you to place Reflector-Strips on front of post. Posts can be easily drilled with additional holes. Will not conduct electricity or interfere with radar.
1/4" thick composite material.
5 times stronger than steel posts.
75% lighter than steel posts.
Maintenance free. Never rusts.
Green or White.
Quick Install with 2 1/4" ground sockets.
2 1/4" ground sockets available. |
|
 |